HOW TO DRIVE OUT MOISTURE FROM ELECTRIC POWER DRILLS

Don’t let your electric power drill mix with water. A damp drill is asking for trouble, so to stop moisture from creeping in and causing some serious damage like short circuits and rust – follow our 3 steps to keep your electrical contacts rust free and healthy.

Things you will need

  • A can of the lavender-scented lube and the red straw

Step 1

STEP 1

Hit the off switch on your electric power drill. Let it cool off and remove necessary batteries. Then, locate your connectors and terminals.

trade how to drive out moisture from electrical contacts step 1

Step 2

STEP 2

Spray the electrical contacts with your favourite water-displacing formula using your red straw to guide it. GT85 will drive out moisture and protect its precious parts from corrosion.

trade how to drive out moisture from electrical contacts step 2

Step 3

STEP 3

Let your electric power drill sit for a bit. Anyone in the know will know that the spray needs to fully evaporate before putting the casing back together. Once it’s reassembled, give it a test drive.

trade how to drive out moisture from electrical contacts step 3

MORE ABOUT GT85

Lube, clean and protect your electric power drill with the good stuff. Grab a can from our Amazon shop today. Trust us, one can does it all.

The uses shown and described for GT85 were provided to WD-40 Company by the users themselves. These uses haven’t been tested by WD-40 Company and do not constitute a recommendation of suggest GT85 products. Always follow the instructions and take heed of any warnings printed on the packaging.